Hormann katalog

Accessories Push button, key switch, pull switch, key switch post Push button DTP 02 Open or close via a command button, separate stop button and operation control light for control voltage, lockable with profile half cylinder (available as an accessory). Dimensions: 86 × 260 × 85 mm (W × H ×D) Protection category: IP 44 Push button DTP 03 For separate control of both operational directions, separate stop button and operation control light for control voltage, lockable with profile half cylinder (available as an accessory). Dimensions: 68 × 290 × 74 mm (W × H ×D) Protection category: IP 44 Emergency-off button DTN 10 To quickly immobilise the door, push-to-lock button (mushroom button), surface-mounted. Dimensions: 93 × 93 × 95 mm (W × H ×D) Protection category: IP 65 Emergency-off button DTNG 10 To quickly immobilise the door, oversize push-to-lock mushroom button, surface-mounted. Dimensions: 93 × 93 × 95 mm (W × H ×D) Protection category: IP 65 The lockable function serves to isolate the control voltage and immobilises the command units. Profile half cylinders are not included in the scope of delivery for the push buttons. Key switch ESU 30 with 3 keys Recessed version, Impulse or Open / Close function selectable. Dimensions of switch box: 60 mm (d), 58 mm (D) Dimensions of cover: 90 × 100 mm (W × H) Wall recess: 65 mm (d), 60 mm (D) Protection category: IP 54 Surface-mounted version ESA 30 (not shown) Dimensions: 73 × 73 × 50 mm (W × H ×D) Key switch STUP 30 with 3 keys Recessed version, Impulse or Open / Close function selectable. Dimensions of switch box: 60 mm (d), 58 mm (D) Dimensions of cover: 80 × 110 mm (W × H) Wall recess: 65 mm (d), 60 mm (D) Protection category: IP 54 Surface-mounted version STAP 30 (not shown) Dimensions: 80 × 110 × 68 mm (W × H ×D) Pull switch ZT 2 with cord Impulse generation to open or close the door. Dimensions: 60 × 90 × 55 mm (W × H × D) Pull cord length: 3.2 m Protection category: IP 65 Cantilever arm KA1 (not shown) Extension 1680 – 3080 mm. Can be used with ZT 2 Key switch post STS 1 With adapter for fitting TTR 100, FCT 10 b, CTR 1b / CTR 3b or STUP. The command units must be ordered separately. The post is anodised aluminium (natural finish). Top and bottom end of post in Slate grey, RAL 7015. Dimensions: 300 mm (d), 1250 mm (H) Protection category: IP 44 Version with fitted key switch STUP 30 (as accessory) 21